Quick Setup for Pro4
The following is a step-by-step installation guide to configure V4.x to work with
CU-Central services

Set Rates /Codec / Video Size / Video
Quality
1.Start the V4.0 Conferencing Companion

2.Select "Tools" from the menu bar and the "Preferences"
option.

OR

3.Select the "Network" icon from the left hand
frame.

4.Click the "Custom" button
5.Set Send to 20 and Receive to 40
6.Select the "Advanced Settings" icon from the left hand frame.
7.Scroll down to the "Conference" option and make sure there is no check mark in the "Auto Open" feature.

8.Scroll further down to the "Video" option
and put a check in the "H.263" feature

9.Just below is the "Video Size" option and set
a check in the "Sub-QCIF" feature.

10. Select the Video icon from the left hand frame ![]()

11. Make sure there is a check mark in the "Auto Send Video"
option at the top.
12. Make sure that the scroll bar for the "You Prefer to
Send" is in the middle between Faster and Better Quality

13. APPLY and Exit.
To Add the cu-central video chat rooms
to your V4.x address list...
1.start the Cu-SeeMe Conferencing companion

2. Select addresses from the left hand column
3. Select conferences from the button bar on top

4.enter the name of a cu-central video chat room

5. Enter the address of a cu-central video chat room

6. If a member, add the CU-Central members conference ID leave the password
blank

7. Do this for each video chat room listed at CU-Central
To save the list and not lose it you have to make sure your CU Core is shutdown completely.
Alt+Ctl+del ONCE go down the list and shutdown CUcore

To set your nickname under V4.x....
1. Start the Cu-SeeMe Conferencing companion

2. Select tools and preferences from the menu bar

OR

3. Select "personal information" from the left hand column

4. Fill in the blank listed as "Nickname" with your CU-Central authorized
nickname
![]()
HOME